Home > Hard Drive > Serial ATA Woes With XP
Serial ATA Woes With XP
If you find out any good info, please let me know...thanx!Regards,Robert Flag Permalink This was helpful (0) Collapse - Sata is primary by edersch / July 28, 2005 9:26 AM PDT The runtime drivers exist only because subsequent service packs (SP1/2/3) added them to the operating system. Should be an easy move. by tubaloth / June 1, 2006 3:55 AM PDT In reply to: Mixing SATA and IDE drives in a system? weblink
Extracting files Start Total Commander by clicking Start, All Programs, Total Commander and then click Total Commander 32. My next step now will be to use Partition Master to format the laptop's HDD, partition, and install XP into the C: drive. Motherboards > Older MSI motherboards XP - Serial ATA Problems << < (4/5) > >> chipfryer: Thanks, I will attach CD ROM to IDE 1 and try to get this focused Start a free trial today. https://forum-en.msi.com/index.php?topic=40384.15;wap2
How To Connect Ide Hard Drive To Sata Motherboard
Thanks in advance John Calcote says: August 10, 2009 at 2:55 pm Finding drivers for your hardware is arguably the most difficult part of this entire process. Ask the community! I already used the mobo supplied drivers on a floppy. Windows will assign drive letters (on a rather permanent basis) to devices based on the order in which they are found during a hardware probe.
My motherboard is Asus P5LDS-X/1333 I updated the BIOS - nothing in there about SATA (all IDE). The great thing about nLite (and why I tried it) is that it was a very easy application. The earliest IDE drives were called hardcards and were nothing more than hard disks and controller cards bolted directly together and plugged into a slot as a single unit. How To Make Ide Boot Instead Of Sata So, how do I get the drivers installed into WINDOWS XP?
You see, I actually left it the way it was for about 4 months before reinstalling, and I ran into several software packages during that period that had trouble with the Reliability is increased because the data encoding, from digital to analog, is performed directly on the drive in a tight noise-free environment. So I thought I'd just allow the Windows XP install to run while I worked on my laptop. http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/installation-problems-with-windows-xp/831bb30c-85b9-46ec-88ed-b5fe3f03bfa6 Your mobo sounds similiar to mine.
John Calcote says: September 29, 2011 at 3:51 pm Hi Jerry - This entire article is about just that subject. What Are The Two Goals When Implementing A Raid Solution A New Hard Drive So I moved over to my laptop at the desk in the same room, opened a browser and logged into one of my favorite hardware sites: ZipZoomFly. You can think of a host adapter as a device that connects a controller to a bus. SHOW ME NOW CNET © CBS Interactive Inc. / All Rights Reserved.
Sata And Ide Hard Drives Together
And the drivers for XP for this MB have been very hard to find. http://www.quepublishing.com/articles/article.aspx?p=2028834&seqNum=4 Further to my post above...My only guess is the IDE-to-SATA adapters attached to the IDE hard drives are junk. How To Connect Ide Hard Drive To Sata Motherboard So I did a little more research to see if the drive could be configured for the lower transfer rate. Ide And Sata Drives In Same Computer Thks again 😉 Giridhar says: April 1, 2009 at 11:29 am Hello sir, i need to tell you one thing about this post… this post is not different from any other
I don't think you read my question correctly. have a peek at these guys Save changes and exit Computer Setup. You can usually clear these by shorting a jumper on the motherboard for a few seconds with a screwdriver or some other metal tool-while the system is powered down, of course. NOTE Many people who use systems with ATA connectors on the motherboard believe that a hard disk controller is built into their motherboards, but in a technical sense the controller is Motherboard With Ide And Sata Ports
Advertisement Recent Posts numbers keypad issue bob0101 replied Mar 2, 2017 at 3:26 PM New Hard Drive Showing up with 0 Gb Mr.Ashy replied Mar 2, 2017 at 3:03 PM HTTP I was too busy looking for Acer and AMD to have the SATA controller. Eventually, the 40-pin ATA connector and drive interface design was placed before one of the ANSI standards committees that, in conjunction with drive manufacturers, ironed out some deficiencies, tied up some http://itreader.net/hard-drive/serial-ata-problems-please-help.html Regards Chris John Calcote says: February 19, 2010 at 4:42 pm Thanks for the comments Chris.
vango44: Just to clarify things, You do NOT need to enable Raid and install drivers with SATA on the Intel contoller. Ide Hard Drive Jumper Settings Unfortunately I wasn't able to find the SATA info from POST screen but once you told me it will be a third party company finding the answer wasn't hard. ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.3/ Connection to 0.0.0.3 failed.
Proffitt Forum moderator / December 7, 2006 5:45 AM PST In reply to: SATA & IDE Combination Troubles--but w/ SATA adapters IDE's But I'll decline why since this post is buried
If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. I have 2 DVD drives on the IDE cable.I have ensured that with the SATA adapter on the IDE drives, the jumper settings on the IDE drives are all set to Anyone got a clue what's up? How Many Hard Drives Can Be Connected To A Single Ide Cable Thank you for helping us maintain CNET's great community.
I unplugged my cable from the SATA 1 port on the motherboard and plugged it into the SATA RAID1. Acer happens to make is easy if you have the right system. Although the correct name for the particular IDE interface we most commonly use is technically ATA, many persist in using the IDE designation today. this content IDE and SATA drives use different controllers.
I don't want a RAID config. I couldn't find this info anywhere. I had no memory of anything going wrong when putting all the parts together,,,, BUTI now do remember starting the PC with Clear CMOS jumpers installed. Send me an e-mail.
What the crap. thanks, TOM P.S. The RAID component of the board is only, 0,1, 10 and JBOD, so I thought it was simple enough, not to give me any problems. I have a newer computer with both SATA and IDE and have both a SATA and IDE drives and controllers - most newer boards with SATA will have 4 SATA connections
it freezes at the windows loading screen.>i formatted and partitoned the SATA drive wiv the disk writer program from Seagate, and now the SATA switches between being one partition or the Some SATA AHCI drivers are available on the www.hp.com web site.